How to iso mod CodWaW - Tutorial

1. You will need DVD+DL 8.5GB Disks (dl means Dual layer/Double Layer) And they need to be atleast 2X Speed.

The best Brands are Memorex and Verbatim

Spoiler:

2. Download some tools
abgx360
ImgBurn
Wx360

www.megaupload.com/?d=QBITZ9JM - Updated link to include the setup.exe for abgx360


3. You will need to download a call of duty World at War iso. and some modded files

I will not link to a download because it is illegal and it considered warez

Make sure that the iso is for your region
Pal = England/Australia
NTSC = America
Region Free = Everyone ~ Recommended.


Now you will need to download the modded files for CodWaW Zombies
-Code_post_gfx.ff
-Nazi_zombie_prototype.ff

3.5. Download some modded files for Call of duty World at War

Modded Files you need!

Spoiler:

Make sure that the iso is for your region
Pal = England/Australia
NTSC = America

Spoiler:

Region Free = Everyone ~ Recommended.


Now you will need to download the modded files for CodWaW Zombies
-Code_post_gfx.ff
-Nazi_zombie_prototype.ff
-Common.ff

3.5. Download some modded files for Call of duty World at War
(You can find these in this forum)

4. One you have the modded files and the CodWaW .iso you can continue.

Open abgx360 GUI
Go to the 'autofix' Tab

Make your settings as mine are.

Spoiler:

Go to the 'Option' tab and make your settings like mine.

Spoiler:

Go to File > Save settings... and save the settings. Load these settings everytime you use abgx360.

Now go to File > Open input and open the CodWaW .Iso
Press Launch, located at the bottom of the program and it will start checking your iso for errors. Wait until it says press any key to exit..

If everything is green, that means you have a working .iso
If certain things are red, than this means your .iso is bad and you will need to re download a new one.


5. Open wx360. Go to file > Open. Open your iso for CodWaW
When opened it will look like this.

Spoiler:

Now this is very important, Go down until you see default.xex, Right click and extract to desktop.

Go up to Code_Post_Gfx.ff and replace with the modded file you downloaded.
Go down to Common.ff and replace with the modded file you downloaded
Go down to nazi_zombie_prototype.ff and replace with the modded file you downloaded.

Wait until they are done.

Replace the default.xex with the one you extracted to the desktop
(we do this because when you replace the other files with the modded one the default.xex gets corrupted. So we replace it after with the uncorrupted one.)

Exit out of wx360


6. Open ImgBurn
Go to Tools > Settings > Write tab

Copy the following settings.

Spoiler:

Press Ok

Now press write Image File to disk

Spoiler:

Choose your speed for burning (I suggest 2.4 or 2 for it to properly burn without any mistakes)

Go to open file.. You should of noticed the .dvd file that you have

IMPORTANT: Make sure you open the .dvd file. NOT the .iso file.

ImgBurn should look like this.

Spoiler:

Now burn the disk

After a while it will pop-up with something that says "Failed to close dvd tray, close the tray and press ok"
Close the tray and press OK.

It will verify your disk.

Wait until this is done then you will hear a nice little jingle informing you that your disk is done

Spoiler:

Spoiler:

I hope you guys enjoyed this Tutorial it took me over 2 hours to make it all! So have fun ISO modding!